Replacing the screen on a Microsoft Surface Pro 5 can be a challenging task due to the device design. Microsoft’s Surface devices are not designed for easy user screen replacement. if you’re confident in your technical skills and want to proceed, here’s a general guide.
Table of Contents
Tools Needed:
- Heat gun or hairdryer
- iFixit Opening Picks or similar plastic opening tools
- Phillips screwdriver
- Replacement screen compatible with Surface Pro 5
- Adhesive strips or adhesive glue for reattaching the screen
Steps to Replace Microsoft Surface Pro 5 Screen:
There is a significant chance that you may break the unreinforced and fragile display panel during this procedure. Be sure to apply plenty of heat and be extremely careful during the prying stage.If the screen’s glass is cracked, keep further breakage contained and prevent bodily harm during your repair by taping over the glass. Lay overlapping strips of clear packing tape over the display until all the glass is covered. Wear safety glasses to protect your eyes.Microsoft replacement components are intended for out-of-warranty repair performed by individuals who possess the knowledge and technical competence to perform complex electronic repairs.
Prepare Workspace
- Choose a clean, well-lit workspace with ample room to work.
- Power off your Surface Pro 5 and disconnect any cables or peripherals.
Heat and Soften Adhesive:
- Use a heat gun or hairdryer to gently heat the edges of the Surface Pro 5, especially around the display.
- Heat the device for a few minutes to soften the adhesive that holds the display in place.
Separate Display and Back Cover
- Insert an opening pick or plastic tool between the display and the back cover.
- Slowly and carefully work your way around the edges to separate the display from the back cover. Take your time to avoid damaging the device or display.
Disconnect Components
- Once the display is separated, disconnect any cables or connectors attached to the display and motherboard.
- Take note of how the cables are routed for reassembly.
Remove Old Screen
- Carefully lift the old screen away from the device, ensuring not to damage any other components.
- Be mindful of any adhesive or adhesive strips holding the screen in place.
Install New Screen
- Place the new screen in position, aligning it correctly with the device’s housing.
- If needed, apply adhesive strips or adhesive glue to secure the new screen in place.
Reconnect Components
- Reconnect the cables and connectors to the new screen and motherboard. Ensure they are firmly seated.
Reassemble Surface Pro 5
- Carefully reattach the back cover to the device, ensuring all edges are properly aligned.
- Press down gently to reseal the adhesive and secure the display in place.
Note:
- It’s crucial to use a compatible replacement screen specifically designed for the Surface Pro 5.
- Replacing the screen on a Surface Pro 5 is a delicate process and may require advanced technical skills. Consider seeking professional assistance if you’re not confident in your abilities.
If you use your Microsoft Surface to run your business, you don’t have the time to send it away for a repair. Lucky for you, Reformtech can have your device looking and running like new in just a few hours. We have locations across Kolkata, so your local location is just a short drive away. Don’t let your productivity suffer because of a broken device, and we can get your Microsoft Surface back up and running in no time and for the lowest price around.
ReformTech is a highly reliable Laptop and Smartphone repair service provider that offers on-site repairs for various brands. We specialise in fixing hardware issues, including screen replacements, keyboard replacements, RAM upgrades, SSD upgrades, and even motherboard repairs. Contact us at 8100257620 for fast and efficient service.
