How to Apple Watch Series 7 Disassembly

Apple Watch Series 7 Disassembly Guide

Apple Watch Series 7 without removing or disconnecting the battery first. However, this can lead to a malfunction of the NFC antenna under certain circumstances.

Tools Required:

To disassemble the Apple Watch Series 7, you will need the following tools:

1. Plastic Opening Tools – These help safely pry open delicate components without causing damage.
2. Tweezers – For handling small and delicate internal components.
3. Screen Disassembly Tool – A very thin, curved metal blade designed specifically for opening electronic devices with tightly sealed screens. This tool is highly recommended for disassembling all Apple Watch series due to the minimal gap between the screen and the watch body.
4. Adhesive Sticker – Required for resealing the display after replacement.
5. B7000 Glue – A highly elastic, anti-vibration, and water-resistant adhesive ideal for reassembling the Apple Watch securely.
6. Hair Dryer or Heat Gun – To warm the adhesive and make screen removal easier.
7. Eye Protection – Necessary for safety when dealing with cracked screens.

Pre-Disassembly Steps:

1. Power Off the Apple Watch Series 7:
   • If the touchscreen is functional, turn off the watch as usual.
   • If the touchscreen is broken, press and hold both the side button and digital crown simultaneously.
   • Continue holding while the Apple Watch reboots.
   • When you see the Apple logo, release the digital crown but continue holding the side button until the Apple logo disappears.

Removing the Apple Watch Series 7 Screen:

1. Heat the Display Surface:
   • Use a regular hair dryer or heat gun to warm the display. This softens the adhesive and makes screen removal easier.
2. Insert the Screen Disassembly Tool:
   • Carefully insert the thin curved blade into the small gap between the display and the watch body.
   • Gradually begin to separate the display while being cautious not to insert the blade too deep, which could damage internal components.
3. Remove the Cracked Screen:
   • Wear eye protection to prevent injury from broken glass.
   • Carefully turn the display towards the watch crown to access the internal components.

Disconnecting the Display:

1. Remove the Black Tape:
   • Using tweezers, gently peel off the black tape covering the ribbon cables.
2. Unlock the Ribbon Cables:
   • Use a plastic tool to lift and open the locking tabs securing the display’s ribbon cables.
3. Detach the Display Ribbon Cables:
   • Heat the surface slightly if needed to ease removal.
   • Carefully pull the display ribbon cables out of their connectors.

Installing the New Screen:

1. Prepare the New Display:
   • Ensure you have the correct replacement screen for the Apple Watch Series 7.
   • Connect the new display’s ribbon cables into their respective connectors.
2. Secure the Display:
   • Reapply protective tape over the ribbon cables.
   • Carefully position the new display onto the Apple Watch body.

Sealing the Apple Watch Series 7:

1. Apply Adhesive for Water and Dust Resistance:
   • Use B7000 glue to seal the edges of the screen to the watch housing.
2. Hold the Display in Place:
   • Use clips or rubber bands to keep the display securely pressed against the watch body while the glue sets.
3. Drying Time:
   • The B7000 glue takes 6 minutes for surface drying.
   • For best results, wait at least 45 minutes before handling the watch.
   • The glue fully cures in 24-48 hours for optimal durability and water resistance.

Final Steps:

1. Power On the Apple Watch:
   • Turn on the device to test the new screen’s functionality.
2. Check for Proper Sealing:
   • Ensure there are no gaps between the display and the watch housing.

Conclusion:

By following these steps, you can successfully replace the Apple Watch Series 7 screen while maintaining its water and dust resistance. Always handle components carefully and ensure the proper application of adhesive for a secure fit. If you’re unsure about any step, consider seeking professional repair assistance.

Looking for expert Apple mobile repair? At Reformtech, we provide top-notch repair services to get your iPhone back to peak performance. Whether it’s screen repair, battery replacement, or any other issue, we deliver the Best Service in Kolkata at Behala Chowrasta with guaranteed quality. 📱🔧 #Reformtech #AppleMobileRepair #BestServiceInKolkata #iPhoneRepair

Need a reliable service center near you? ReformTech is a trusted Laptop and Smartphone repair service provider, offering on-site repairs for various brands. We specialize in fixing hardware issues, including screen replacements, keyboard replacements, RAM upgrades, SSD upgrades, and motherboard repairs.

📞 Contact us at 8100257620 for fast and efficient service.

#AppleServiceCenter #MacBookRepairCenter #LaptopServiceCenter #iPhoneRepairCenter #MacBookRepairCenter #DellRepair #LenovoRepair #HPRepair#AsusRepair#AcerRepair#BestRepairService#MacBookServiceCenter#iPhoneServiceCenter#AppleRepairCenter#MobileServiceCenter