Replacing the USB-C ports on a MacBook Pro 16″ (2021) model is a complex task that typically requires advanced technical skills, as the ports are soldered directly onto the logic board. This type of repair is best performed by a professional or at an Apple Authorized Service Provider. However, if you’re an experienced technician or simply want to understand the process, here’s a general overview of what’s involved.
Tools Needed
- Replacement USB-C port or logic board
- Pentalobe screwdriver
- Torx screwdriver
- Plastic spudger or opening tool
- Anti-static wrist strap
- Soldering tools
- Tweezers
Table of Contents
Use this guide to replace one or all of the USB-C ports in your MacBook Pro 16″ 2021.
Power Off Your MacBook
Completely power off and unplug your MacBook Pro before you start. Close the display and flip the entire laptop upside-down.
Remove the Bottom Case
Use the Pentalobe screwdriver (P5) to remove the screws securing the bottom case of the MacBook. Press a suction handle into place near the front edge of the lower case, between the screw holes. Slide the opening pick around the nearest corner and then halfway up the side of the MacBook Pro.
Disconnect the Battery
Use a spudger to gently pry up the locking flap on the ZIF connector for the battery board data cable. Locate the battery connector and use a plastic spudger to disconnect it from the logic board. This is crucial to avoid any electrical damage during the repair.
Locate the USB-C Ports
The USB-C ports are soldered onto the logic board. Depending on the design of the MacBook, the ports may be part of a modular assembly or directly integrated into the logic board.
Remove and Replace the USB-C Ports
Use the flat end of a spudger to pry up and disconnect the left speaker’s press connector. If replacing a modular I/O board, remove the old board and replace it with the new one, reconnecting all necessary cables. If replacing individual USB-C ports, carefully desolder the old ports and solder the new ones in place. This requires precision and experience with micro soldering. If you’re replacing a single port, only remove the screws for the corresponding port.
If you use your MacBook Air &Pro to run your business, you don’t have the time to send it away for a repair. Lucky for you, Reformtech can have your device looking and running like new in just a few hours. We have locations across Kolkata, so your local location is just a short drive away. Don’t let your productivity suffer because of a broken device, and we can get your MacBook Air & Pro back up and running in no time and for the lowest price around.
We hope our customers are confident that they are getting the best deal on their repair. We have a low price guarantee that promises that if you can find a lower advertised price for the same repair, we will match and beat that price. Our standard warranty is valid at Reformtech, protecting your device no matter where you need us. Description: Looking to repair your MacBook Air & Pro? We Can Fix It, From MacBook Air & Pro Screen Replacement, Battery Replacements, Keyboard & Case, Adware Removal and More.
ReformTech is a highly reliable Laptop and Smartphone repair service provider that offers on-site repairs for various brands. We specialise in fixing hardware issues, including screen replacements, keyboard replacements, RAM upgrades, SSD upgrades, and even motherboard repairs. Contact us at 8100257620 for fast and efficient service.
